HOBBYWING Platinum Pro 100A-V3 (2-6s)

  • 10 Amp continuous BEC, 25 peak for version 100A
  • BEC Voltage software adjustable
  • GOVERNOR STORE mode
  • 50MHz processor
  • PWM adjustable up to 32KHz
  • Industry's BEST throttle response in governor mode
  • Separate output for reading / recording engine RPM
  • 180 Day Official Limited Warranty
  • Recommended Products: Professional LCD Programming box

 

Model

Platinum-100A-V3 (30204101013)

Battery Count

2-6S LiPo, 5.2V-25.2V

Cont./Burst Current

100A/150A (burst in 10 sec)

BEC Output

Switch Mode BEC 6.0V/7.4V/8.4V  Cont.: 10A Burst: 25A
BEC has cut-through protection (Battery voltage will not get through to the receiver if BEC is accidentally damaged)

Input/Output Wire

Input: 12AWG / Output:12AWG, 4mm Gold plated bullet connectors


 

Weight (without fan): 104g

Size: 77 mm x 35 mm x 21 mm

 

Weight (with fan): 110g

Size: 77 mm x 35 mm x 32mm

 

  • High-performance microprocessor with operating frequency up to 50MHz brings excellent compatibility with most motors in the market and high driving efficiency.
  • The maximum motor speed can reach: 210,000 RPM for 2-pole, 70,000 RPM for 6-pole and 35,000 RPM for 12-pole.
  • Multiple flight modes: Fixed Wing Airplane/ Heli with Governor Off/ Heli with Governor (Elf) / Heli with Governor Store.
  • Adjustable throttle range, compatible with various transmitters. It gives smooth, soft & linear speed adjustment and rapid throttle response.
  • The microprocessor is powered by a independent DC regulator resulting in better anti-interference performance, which greatly reduces the risk of losing control.
  • Built-in highly efficient & high-power (switch mode) BEC lets the output voltage switch between 5.2V / 6.0V / 7.4V / 8.4V. (*For the specific output voltage, please refer to the parameter list below.)
  • Brand new easy to operate governor program. Its excellent speed-governing effect makes big rotor blades more stable even under rapid load change.
  • ”Restart in auto rotation" can manually interrupt the auto rotation and quickly restart the motor to avoid crashes caused by incorrect operations.
  • Independent output port for RPM signals.
  • Compatible LCD program box (*optional accessory) has a simple visual interface allowing users to set/revise all the ESC parameters easily. (For detailed information, please refer to the LCD Program Box user manual.)
  • The ESC firmware can be upgraded after connecting to a PC via the USB cable on the program box.
  • The independent port used for connecting the program box and setting parameters also functions as the output port for the running status data of the ESC. It can make real-time data monitoring and logging possible when coordinated with the data transmission module.
  • Multiple protection features including input voltage abnormality protection/ low-voltage cutoff protection/ and throttle signal loss protection prolong the service life of the ESC.

 

 

NOTE: all HOBBYWING products are GENUINE, and have the mfgr's Anti-Counterfeit code on each package.


HOBBYWING Platinum Pro 100A-V3  (2-6s)
Click To Enlarge
  • Item #: HWPLATPRO100A
  * Marked fields are required.
Qty*
Price $98.00
Sale Price $78.40
Availability In-Stock

Related Items