YEP HV120A ESC

 

 

All YEP ESCs can be programmed via optional programing card or by transmitter stick inputs.

Features:
• HV capability for use with up to 14S (51.8V) Lipoly 
• Optional programming card for convenient setup  
• ESC had separate programming lead built-in so there is no need to unplug from RX 
• Super fine throttle resolution provides first-rate and highly accurate linearity  
• Super smooth adjustable start-up mode 
• Constant RPM mode (governor mode)
• Adjustable F3A brake.   
• 3 steps adjustable normal EMF brake   
• High anti-interference capability
• Low voltage cut-off protection with automatic adjustment for NiCd/NiMH/Li-Ion/LiPo/LiFePO4   
• Soft cut-off option at low voltage, slows motor RPM gradual rather than hard cutoff (LVC)
• Low voltage cut-off can be disabled   
• Variable cut-off voltage / cell     
• Active free-wheeling circuit allows for unlimited "partial load" capability 
• LED status display   
• Adjustable motor timing from 0° to 30°   
• Blocked rotation protection (senses a jammed motor and stops motor rotation)   
• Motor reversing from ESC (no need to change ESC/motor wires)  
• Over-temperature protection and overload alarm   
• Anti sparking circuit: reduces connection sparks  
• Throttle signal lose protection. If the signal is lost for 3 seconds, the power will automatically cut-off.   
• Safe power-on. (Motor will not start until throttle is returned to lowest position)


***This ESC is compatible with both helicopter and airplane models.***


Specification:
Max Cont Current: 120A
Max Burst Current: 140A for 10 seconds
Input Voltage: 4-14 cells li-XX or 12-42 Ni-MH/Ni-Cd battery
BEC: None (OPTO)
PWM: 8~16 KHz
Max RPM: 240,000rpm for 2 Poles Brushless Motor
PCB Size: 68x53mm
Weight: 164g (including wires)


YEP HV120A ESC
Click To Enlarge
  • Item #: YEP120HV
Price $127.30
Availability Out-of-Stock

Related Items